Need help?Do you have a question about the PR electronics 5333 and is the answer not in the manual?
General| Brand | PR electronics |
|---|---|
| Model | 5333 |
| Category | Transmitter |
| Language | English |
Specifies the operational temperature range from -40°C to +85°C.
Details supply voltage, consumption, warm-up time, and interface.
Presents general and basic accuracy values and temperature coefficients.
Defines parameters for Pt100, Ni100, and Lin. R input types.
Details signal range, updating time, and load resistance for current output.
Covers programmable and NAMUR NE43 error detection.
Details certification from Det Norske Veritas, Ships & Offshore.
Lists ATEX, FM, CSA, IECEx, and GOST Ex certifications.
Illustrates input wiring for RTD and resistance types.
Shows the 2-wire installation output wiring.
Diagram for connecting Loop Link for programming the PRetop 5333.
Shows correct mounting of sensor wires between metal plates.
References to ATEX installation drawings for models 5333A and 5333D.
References to IECEx installation drawings for models 5333A and 5333D.
Reference to FM installation drawing for model 5333D.
Reference to CSA installation drawing for model 5333D.
Details ATEX marking, certificate, and relevant standards.
Specifies voltage, current, and capacitance parameters for terminals.
Provides special conditions for safe installation and use in hazardous areas.
Details ATEX marking, hazardous area classification, and temperature limits.
Specifies parameters for terminals and barrier in hazardous areas.
Notes for installation in potentially explosive gas and dust atmospheres.
Details IECEx certificate, marking, and temperature limits.
Specifies parameters for terminals in Ex nA [ic] and Ex ic configurations.
Instructions for installation in explosive gas and dust atmospheres.
Details IECEx certificate, marking, and hazardous area zones.
Specifies parameters for terminals in Ex ia IIC and Ex ia IIIC configurations.
Notes for installation in potentially explosive gas and dust atmospheres.
FM approved parameters for models 5331C, 5331D, 5333C, 5333D, 5343B.
FM approved parameters for models 5335C, 5335D, 5336D, 5337D.
Details parameters for NI Field Circuits according to the entity concept.
CSA approved parameters for models 5331D and 5333D.
CSA approved parameters for models 5335D, 5336D, and 5337D.
To Next Page
