4116V105-UK 29
[41]
[42]
[43]
[44]
[45]
[46]
[47]
[48]
[49]
[50]
[51]
[52]
[53]
[54]
[55]
[56]
[57]
[58]
[59]
[60]
[61]
[62]
[63]
[64]
[65]
[66]
[67]
Select 1-0.2 V output range
Select 5-0 V output range
Select 5-1 V output range
Select 10-0 V output range
Select 10-2 V output range
Set temperature for analog output low
Set temperature for analog output high
Enter password setup
Enter simulation mode
Perform process calibration
Enter display setup
Perform memory operations
Enter relay latch setup
Load saved configuration into 4116
Save 4116 configuration in 45xx
Adjust LCD contrast
Adjust LCD backlight
Write a 6-character device TAG
Analog output value is shown in display line 3
Device TAG is shown in display line 3
Calibrate input low to process value?
Calibrate input high to process value?
Enable simulation mode?
Set the input simulation value
Relay simulation - use 1 and 2 to toggle relay 1 and 2
Enable password protection?
Set new password
Enable Fastset functionality?
Relay setpoint - press 3 to save
Relay setpoint - Read only
Select language
Use process calibration values?
Set value for low calibration point
Set value for high calibration point
Select CJC connector (accessory)
Select internal temperature sensor
Enable relay latch function?
Relay is latched - press 3 to acknowledge
Relay 1 is latched - press 1 to release
Relay 2 is latched - press 2 to release
Relays are latched - press 1 or 2 tor release relay 1 or
relay 2
Release relay? (if conditions allow)
Enter setup menu? (latched relays may release!)
To Next Page
Loading...
