18 4225V100-UK
Supported output configurations
For the 4225A/-B a concurrent and independent operation of analog output and relay is possible. For 4225C the output is either
presented on the analog or frequency output. In case of 4225C being configured for analog output, the frequency output can be
configured for ‘relay mode’.
When both analog and frequency output is used, and frequency output is configured for PNP or push-pull, a common ground
is not possible for terminal 21 and 23.
Observed authority requirements
EMC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014/30/EU & UK SI 2016/1091
LVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2014/35/EU & UK SI 2016/1101
RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2011/65/EU & UK SI 2012/3032
Approvals
c UL us, UL 508. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pending
To Next Page
Loading...
Need help?
General
