To Next PageTo Next Page
Need help?Do you have a question about the PR Lighting XR 230 SPOT PR-2200 and is the answer not in the manual?
General| Color Temperature | 3200K-6500K |
|---|---|
| Power Consumption | 220W |
| Pan | 540° |
| Tilt | 270° |
| Input Voltage | AC90-240V, 50/60Hz |
| Dimmer | 0-100% |
| Control | DMX512 |
| Channels | 20 |
| Cooling System | Fan cooling |
Critical safety warnings regarding lifting methods and safety cord capacity.
Step-by-step guide for removing and installing the projector lamp, including handling notes.
Importance of proper earthing and adherence to relevant electrical installation standards.
Procedure for setting a unique DMX start address for each projector.
Details of sensor error codes (S1-M1 to S1-M5) related to component failures.
Error codes for motors (S2, S3) and various sensor malfunctions.
Error messages related to overheating, driver issues, and encoder problems.
Mapping DMX channels to functions like Strobe, Dimmer, and CYM Macro.
DMX control parameters for Color Wheel and Iris functions.
DMX control for Iris Macro and Fixed Gobo Wheel.
DMX parameters for Gobo Rotation, including speed and shake effects.
DMX control settings for Prism and Frost Filter.
DMX control for Focus, Zoom, Pan, and Tilt movements and speeds.
DMX control for lamp functions (on/off, half power) and reset.
Guidelines for replacing damaged components like lenses, lamps, and fuses.
Lists common operational issues and their corresponding troubleshooting actions.
