Procedure 2.2 - Accessing the Odometer & Software Versions
Procedure
1. Plug the power cord into the wall outlet, then turn on the EFX with the on/off switch.
2. While pressing and holding the ENTER key, press the RESET. INCLINE S and
RESISTANCE T keys, sequentially.
3. The upper display screen will scroll the upper and lower software versions.
4. The lower display screen will scroll the total number of strides and the total number of
operation hours.
5. Press the RESET key to exit the odometer and software versions display.
To Next Page
Loading...
Need help?
General
