Procedure 2.3 - Accessing the Unit Change Mode
Selecting United States standard units causes information to be displayed in miles. Information is
displayed in kilometers if metric units are selected. After you select a measurement standard, the
software accumulates and records workout information in the units of the measurement standard
selected.
Procedure
1. Plug the power cord into the wall outlet, then turn on the EFX with the on/off switch.
2. While pressing and holding the ENTER key, press the RESET, INCLINE T and
RESISTANCE S keys, sequentially.
3. UNIT CHANGE will be displayed.
4. Press a S,T key to view the currently selected unit of measure.
5. Press a S,T key to toggle between U.S Standard and Metric units.
6. Press the RESET key to exits without saving the currently selected unit of measure or the
ENTER key to save the currently selected unit of measure.
7. Press the RESET key to exit the unit change mode.
To Next Page
Loading...
Need help?
General
