905E, 9.1, 9.10 Treadmills
Page 43
11. Insert the right handrail into the upper handrail clamp until the foam just touches the clamp.
Note:
When you position the lower handrail clamp, make sure that the clamp is lined up with the
mounting holes on the treadmill frame.
12. Position the right lower handrail clamp at its mounting location. Replace the screws that
secure the clamp to the treadmill frame.
13. Repeat Steps 11 through 13 for the left handrail clamp.
14. Tighten the screws that secure the handrail to the upper handrail clamp.
15. Plug the power cord into the wall outlet.
Use the item numbers listed in Table 9.1-5 and the exploded view diagram shown in
Diagram 9.1-16 to locate and identify 905e Treadmill components.
To Next Page
Loading...
