905E, 9.1, 9.10 Treadmills
Page 6
Procedure 2.2 - Displaying the Odometer
This procedure allows you to display the number of miles logged on the treadmill. Total miles
logged on the treadmill is different from workout time. Workout time is displayed as described in
the owners manuals provided with the 905e, 9.1 and 9.10 Treadmills.
Procedure
1. Place the magnetic safety key in the ACTIVATE position, then turn on the treadmill with the
circuit breaker.
2. With the Enter Your Weight banner scrolling, press the STOP key, the SPEED ▼ key, and
then the SPEED ▲ key sequentially.
Note:
After you perform Step 2, the electronic console displays the number of miles logged on the
treadmill.
3. Place the magnetic safety key in the OFF position, then unplug the treadmill from the wall
outlet.
To Next Page
Loading...
