C776i Stairclimber
Page 40
7. Wrap the stairarm belt over the HTD pulley, behind and under the upper flanged pulley.
Wrap the belt under an around the lower flanged pulley. Then lift the stairarm and hook the
return spring on its mounting peg. Check the belt to ensure there are no twists in the belt. If
there are remove the return spring from its mounting peg and rotate the return spring to
remove any twist. Hook the return spring on its mounting peg.
8. Replace the left hand and right hand cover sections per Procedure 7.1.
To Next Page
Loading...
