C932, C932i, C934, C936i Treadmill
Page 11
Procedure 2.3 - Accessing the Club Setting Program
This procedure allows you to change the following club settings:
• Language (C932 and C932i only)
• Measurement Units
• Maximum Speed
• Maximum Workout Time
• Maximum Pause Time
• Maximum Cool Down Time (C932 and C932i only)
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. With the banner scrolling, press keys RESET,5,6,5,1,5,6,5, sequentially
3. For C932 and C932i treadmills, skip to step 16. For C934 and C936i treadmills, continue
with step 4.
4. The prompt SELECT UNITS will be displayed. The currently selected measurement unit will
then be displayed.
5. Use the
keys to scroll through the available measurement units.
6. Press the ENTER key to select the currently displayed measurement unit or the STOP key
to leave the original measurement unit selected.
7. The prompt SET MAX SPEED will be displayed. The currently selected maximum speed will
then be displayed in either M.P.H. or K.P.H. depending upon the measurement units
selected.
8. Use the keys to scroll through the possible range of maximum speeds (0.5 to 11.0
M.P.H.).
9. Press the ENTER key to select the currently displayed maximum speed or the STOP key to
leave the original maximum speed selected.
10. The prompt SET MAX WORKOUT TIME will be displayed. The currently selected maximum
workout time will then be displayed.
To Next Page
Loading...
Need help?
General
