Precor C954 Serivce Manual

C954, C956 Treadmill
Page 1-74 Page 74
16. Walk the drive belt onto the drive roller pulley by rotating the drive motor flywheel. Be sure the belt
is fully seated in the grooves of both pulleys and correctly aligned. A drive belt tension gauge
should read 100-120 pounds. The drive belt de-tension after use. A range of 80-90 pounds after
the belt has been installed for a while is acceptable.

Precor C954 Specifications

General

Brand	Precor
Model	C954
Category	Treadmill
Language	English