Product Owner’s Manual: Club Features 14
Table 2. Club custom features and settings
✱ This feature is available in all Precor club units.
Note: When you make changes in club programming mode, the new settings replace the factory defaults. If a user changes the language or unit of measure during an exercise
session, the display resets to the new club settings when a user’s workout ends.
Unit Club Programming Prompt Factory Default Setting Changes you can make
Treadmill SAFETY CODE Disabled An enabled safety code requires a 4-digit entry code before users can access
any exercise programs.
All * SELECT LANGUAGE English Seven languages affect the display prompts. Choose one.
All * SELECT UNITS U.S. Two standard units of measure affect the display prompts. Choose between U.S.
or Metric.
All * SET MAX WORKOUT TIME 60 minutes Exercise session time limits range from 1 to 240 minutes. NO LIMIT is accessible
beyond 240 minutes.
All * SET MAX PAUSE TIME 120 seconds Pause time limits range from 1 to 120 seconds (2 minutes). Restrictions exist for
self-powered units.
All * SET COOL DOWN TIME 5 minutes Cool down time limits range from 1 to 5 minutes.
Treadmill SET SPEED LIMIT Maximum speed available. Refer to Treadmill: Determining the Club Speed Limit.
Treadmill SET INCLINE LIMIT Maximum grade possible. Refer to Treadmill: Setting an Incline Limit.
Treadmill HIDDEN PROGRAMS Hide programs Two options are available: Show Programs or Hide Programs. Choose one.
Treadmill REMOTE CONTROL Disabled A computer must be connected through the CSAFE port to enable this feature
and change the speed or incline for a specific user.
EFX SET CROSSRAMP AUTO-LEVEL Mid-level of ramp incline range This prompt only appears on EFX units which have adjustable ramps. Settings
range from 1 to 20. Refer to EFX: Changing the Auto-Level Setting.
Cycle SET RESISTANCE RANGE High Settings range from High, Medium, and Low. Refer to Cycle: Setting a
Resistance Range.
All * SET CUSTOM PROGRAM 1 Random profile Modify the program profile. Refer to Creating a Custom Program.
Treadmill SET CUSTOM PROGRAM 2 Random profile Modify the program profile. Refer to Creating a Custom Program.