Precor FTS Glide User Manual

FTS Glide Assembly and Maintenance Guide
page 6
1 2 3 4 5 6
3
Assembly
Instructions
Assembly Instructions
Assembly of the FTS Glide takes professional installers
about 1 hour to complete. If this is the first time you
have assembled this type of equipment, plan on
significantly more time.
Professional installers are highly recommended!
However, if you acquire the appropriate tools, obtain
assistance, and follow the assembly steps sequentially,
the process will take time, but is fairly easy.
CAUTION: Obtain assistance! Do not attempt to
assemble the FTS Glide by yourself. Review
Installation Requirements before proceeding with
the following steps.
The FTS Glide comes in two long boxes with 10 smaller
boxes of weights:
• Two boxes of four 10-lb. weights
• Four boxes of five 10-lb. weights
• Four boxes of five 5-lb. weights
Each Weight Stack contains 200 lbs. The weight plates
make up 190 lbs. and the Top Weight Assembly provides
the final 10 lbs.

Precor FTS Glide Specifications

Weight and Dimensions

length	48.5 inches (123 cm)
height	85 inches (216 cm)
width	53 inches (135 cm)