General Safety and Maintenance Manual: Daily Inspection 10
Inspect Pads for Wear
Inspect pads for cracks in the upholstery, broken and loose stitching,
loose staples, and loose mounting bolts. Replace pads as needed
(refer to Obtaining Service to purchase new pads.)
Important: Do not reupholster pads or use pads not approved by
Precor.
Clean and Inspect Frames
To remove grease and dirt, clean frames daily with a mild soap and
water solution in a spray bottle. Wipe the equipment down with a
damp cloth and dry completely. Be sure to wipe down both painted
parts and chrome or plated parts.
To restore and maintain luster of chrome parts, use a commercial
chrome cleaner.
As you clean, inspect the frames for cracks, rust, or other damage.
Make sure welds are solid and fasteners are properly secured.
To Next Page
Loading...
Need help?
General
