General Safety and Maintenance Manual: Monthly Inspection 21
Monthly Inspection
This section covers the tasks you should perform each month to
maintain the equipment. Perform the following tasks as appropriate for
the unit you are maintaining:
• Inspect frames and movement arms.
• Lubricate pop pins.
• Check and lubricate ratcheting seat lever
• Inspect all fasteners.
Inspect Frames and Movement Arms
Inspect frames and movement arms monthly for proper function and
integrity. Check for cracks, chipped paint, or rust. Touch up dings and
chips in the paint as needed. Replace any component at first signs of
wear.
Note: You can order touch-up paint from Precor by calling Customer
Support. Refer to Obtaining Service.
Inspect frames for cracks particularly at the joints. If any cracks are
found, immediately take the equipment out of service, and repair it
using a qualified maintenance technician. Refer to Important Safety
Guidelines for Owners and Obtaining Service).
To Next Page
Loading...
Need help?
General
