General Safety and Maintenance Manual: Recommended Maintenance Checklist 27
Recommended Maintenance Checklist
Initial box when completed: write N/A if not applicable to the equipment.
Daily Check 1 2 3 4 5 6 7 8 9 10111213141516171819202122232425262728293031
Clean upholstery
Clean & inspect frames
Inspect pads for wear
Inspect cables & end connections
Check labels and placards
Weekly Check
7 14 21 28
Condition & clean upholstery
Clean & lubricate cable rod ends
Clean & lubricate guide rods
Inspect cables/connections/tension
Inspect cable handle attachments
Inspect pulleys
Inspect each weight stack & Pin
Inspect & lube bearings & bushings
Check seat adjust. and pop pins or
ratcheting lever
Monthly Check 28
Inspect frames & movement arms
Inspect & lubricate pop pins or
ratcheting lever
Check & lubricate ratcheting seat
Inspect all fasteners
Annual Check
Weight stack maintenance Date: Initials:
Inspect & lubricate pop pins or
ratcheting lever
Date Initials:
Maintenance Tips
Upholstery Wipe clean using a mild soap and water solution or other appropriate cleaner for vinyl.
Cable Replace any cable that shows signs of wear or damage.
Frames Wipe clean using a mild soap and water solution.
Guide rods Lubricate guide rods with silicone spray lubricant.
Important: It is recommended that cables be changed annually. Only factory provided selector key, lanyard, handle attachment, and handle should be used on selectorized weight
stacks. Use of any parts other than those provided by the manufacturer will invalidate the product warranty and may cause injury to users.
Please retain for your records.
Maintenance Record the Month of ______________________
Brand Name ______________________
Model Name & Number ______________________
Serial Number ______________________
In Service Date ______________________