Precor M9.41si - Using the Quick Start Feature.15; Retrieving the Previous Workout Program.15; Pausing Your Workout.15; Cooling down after a Workout.15

I
CAUTION: Hold onto the handrails when you
press QUICK START. The running belt starts
automatically at 1 mph after the display scrolls
the message “BeitStarting 3 ,2,1,.. ”
Using the QUICK START Feature
The words “quick start” imply that you can start your workout immediately. Once you insert the
magnetic safety key and attach the safety clip to your clothing, the QUICK START feature on the
M9 41 si treadmili allows you to bypass the setup prompts and access manual mode. The weight
setting defaults to 150 pounds (68 kg) so all calorie calculations and their associated displays are
based on a body weight of 150 pounds (68 kg). The Smart Rate display will not work when you use
the QUICK START key.
Note: Any prompts that appear after the “SELECT COURSE” prompt require your input before you
can proceed. You can press QUICK START at any prompt and access manual mode features.
However QUICK START is disabled once you enter a program and begin your workout,
Retrieving the Previous Workout Program
To retrieve the previous workout program, simply tap the ENTER key
while the prompt “ENTER WEIGHT” is being displayed. Note that if someone else has exercised on
the treadmill after your workout, whatever program he or she used will be the one that is restored
frnm memorv.
Pausing Your Workout
You can cause at any time during your workout. Use this feature to rest or take a short break. To
pa^hTwoS out, proas Wo STOP key. The running bolt stops. Romovo tho safo^ oiip
and straddlo the running belt so that you can safely step off the treadmill. Your workout statistics
freeze and remain displayed on the console until you resume your workout.
Do not rely on the Pause feature as a way to end your workout. If you wish to end your workout,
follow the instructions in Ending Your Workout
To resume your workout, straddle the running belt, attach the safety key clip to your doWIng,
press the SPEED A key to start the running belt, hold the handrail, and step onto the
while the speed Is at or below 1 mph. Your workout statistics continue from where you left off.
Continue to press the SPEED A key, to increase the speed to a comtortable ®l,®
nnmiortabie with the walking or running speed, you can remove your hands from the handrail.
Cooling Down After a Workout
Cooling down after your workout Is important because it helps reduce ® f _
soreness by transporting excess lactic acid out of the working muscles. Coo mg down ^
3 minutes helps provide a smooth transition that allows your heart rate to return to its normal
/nnn>(>yprnisina1 StEte.
You can cool down after a workout by accessing Manual mode (MAN’L). Tapping STOP twice m
quick succession accesses MAN’L mode from the preprogrammed courses.
Ending Your Woilcout
To end your workout, take the foiiowing steps;
1 Hold onto the handrail and press the STOP key or press the SPEED T key until the running
W slows to a gradual stop. The displays on the console freeze which lets you review your
workout statistics.
2. Continue to press STOP (HOLD TO RESET) for a few more seconds to add your workout
etatieftire: tn thfi Rumulative totals and return to the Precor banner.
3. Straddle the running belt and step off the treadmill.
4. To prevent unauthorized use. remove the magnetic safety key from inside the electronic
console and store it in a sate place. Turn OFF the treadmill.
page 15