62 Assembling and Maintaining AMT 800-Series Adaptive Motion Trainers
Moving the Equipment
The equipment is very heavy. If you plan to move it to a new
location, obtain the help of an adult assistant and use proper
lifting techniques. If the equipment includes roller wheels on
one end, use the wheels to reduce the load on yourself and
your assistant.
To move the AMT:
1. Disconnect, unplug, and remove all external connections
(television, Ethernet, and power).
2. Lift the rear platform molding to remove it.
3. Lift the rear foot supports to tip the AMT forward onto its
roller wheels.
4. Push the AMT into its new location.
5. Lower the rear foot supports to the floor, then reattach
the rear platform molding.
Long-Term Storage
If you do not expect anyone to use the equipment for a long
time, perform the following tasks to prepare it for storage:
If it has a power cord, disconnect the cord.
If it has an optional power adapter, connect the adapter to
prevent damage to the internal battery.
Position it so that it will not become damaged and will not
interfere with people or other equipment.
To Next Page
Loading...
Need help?
General
