Maintenance 65
Weekly Maintenance
Perform the following maintenance tasks every week:
1. Elevate the tread to maximum incline, then turn off the
power switch or circuit breaker and unplug the unit from
the wall outlet.
2. Clean the floor under the equipment using a vacuum
cleaner or a damp mop.
3. When the floor is completely dry, reconnect the power
and return the treadmill to the level position.
4. Inspect the power cord to verify that it is not pinched
under the equipment or between any two moving parts.
5. Test all console functions, including heart rate monitoring
features.
6. Verify that the unit sits squarely on the floor. All of its feet
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.
To Next Page
Loading...
Need help?
General
