36 Operating and Maintaining the P30 Console
Using the Touch Heart Rate Feature
Note: Touch heart rate performance may vary based on your
physiology, fitness level, age, and other factors. You may
experience an erratic readout if your hands are dry, dirty, or
oily, or if the skin on your palms is especially thick. Wearing
hand lotion can also cause an erratic readout. In addition,
make sure that the sensors are clean to ensure proper contact
can be maintained.
To use the touch heart rate feature, place the palm of your
hands directly on the metal heart rate sensors on the
equipment’s handlebars. To ensure an accurate heart rate
readout, make sure you follow these tips:
Both hands must grip the sensors for your heart rate to
register.
It takes a number of consecutive heartbeats (15-20
seconds) for your heart rate to register.
When gripping the sensors, do not grip tightly. Keep a
loose, cupping hold. Holding the grips tightly can affect
the reading.
As you work out, your perspiration will help transmit your
heart rate signal. If you have difficulty using the handheld
grips to determine your heart rate, try the sensors again
later in the workout to see if you can obtain a heart rate
signal.
If the touch heart rate feature does not work for you,
Precor recommends that you use a chest transmitter
strap.
To Next Page
Loading...
Need help?
General
