Assembling the Treadmill 21
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners
Quantity
³₈-inch ×
1-inch
buttonhead
screws
12
¹₄-inch ×
1-inch
buttonhead
screws
4
¹₄-inch ×
¹₂-inch
panhead
self-tapping
screws
4
¹₄-inch ×
1¹₂-inch
panhead
self-tapping
screws
4
To Next Page
Loading...
