Num
Description
Reading Rack
Lower Vent Bezel
Chin (HP/USB Jack)
Upper Access Panel
Rear Cover
HHHR board
Procedure
Review entire procedure before starting.
Removal Instructions
1.
Remove the reading rack . Use a philps screwdriver to remove the two screw fasten-
ers and carefully pry the reading rack off the front cover.
2.
Remove the lower vent bezel . Carefully pry the bottom left and right edges of the
bezel and unsnap from the back cover.
3.
Remove he chin (HP/USB jack) . Use your fingers to lift and unsnap the chin from
the rear cover.
P82 Console 29
4 Replacement Procedures
Console Cover Replacement
To Next Page
Loading...
