Precision Series / Energy Series Treadmill Owner's Manual: TRM 445 / 243 52
You can also change the information shown in the
progress graph during your workout.
To change the progress graph:
1. During your workout, touch Options.
2. At the Options screen, touch Change Graph.
3. Use the arrow buttons to move between the types
of information you can display on the graph
(speed, incline, or heart rate). Touch Add or
Remove to select one or two types of information.
Figure 29: Change Graph Preferences screen
4. Touch Save to save your changes and return to the
workout progress graph. The types of information
you selected appears as lines in the graph.
Figure 30: Progress graph with heart rate and speed
lines
Note: The bars in the progress graph can describe
incline, speed, or a combination of both (refer to
Available Workouts). The width of each bar
corresponds to one minute for timed workouts, or 200
meters (656 feet) for distance-controlled workouts.
These bars scroll from right to left as your workout
continues. The line above the bars shows the entire
length of your workout and your current position in it.
To Next Page
Loading...
Need help?
General
