Activate the console
Pr
ecor equipment is either self-powered or externally powered using an optional power adapter. To activate self-powered
equipment, begin pedaling.
An optional AC power adapter provides sustained power to the equipment or recharges the internal battery. To purchase the
power adapter, contact Precor Customer Support.
Set up the console
You can use the console with default settings or you can customize it two ways:
• Save time by using a USB stick with the dened settings to set up multiple consoles with the same settings.
•
Manually dene club settings and custom parameters on each console.
Setup/Service mode
Use the console Setup/Service mode to congure settings in ways that benet exercisers.
NOTE
The information provided in this section is intended for system administrators and Precor service technicians. DO NOT
share it with exercisers or non-administrative staff.
Button Function
Blue (Focus) Move through settings within each category
Green (Interval) Return to previous category
White (Pairing) Select displayed option, then advance to next category
4
To Next Page
Loading...
