Informational Settings
The Information Settings contain the information required when you contact Precor Customer Support including serial
numbers, software program versions, odometer and error log summary, and model numbers.
NOTE
It is possible to record system information and the error log on a properly formatted USB stick.
Setting Description
CONS SN Console serial number that is printed on a label on the back of the console
LPCA SN Serial number for the printed circuit board in the base, which is also the base equipment serial number
TOP SW Versions of CONS and GEM software are in console
CONS SW One of the two software programs in console
GEM SW One of the two software programs in console
LPCA SW Software part number for the printed circuit board in the base
ODOMETER Total distance (in miles) on bike
HOURS Total hours of use on bike
WORKOUTS Total number of workouts on bike
ERROR LOG • If there are no errors, then there will be nothing below the title.
• If there are errors, the ve most recent errors appear. Press the blue key to navigate through the error
list.
MODEL TYPE Bike model number
Operational Information
Setting
Description
Torque Reported strain gauge force (in-lb)
WATTS Reported power = Total torque x RPM (WATTS)
RPM Revolutions per minute (pedal rate)
6
To Next Page
Loading...
Need help?
General
