Pressure Systems 9022 - C Configure;Control Multi-Point Calibration; T Read Transducer Temperature; All Commands - Quick Reference

Pressure Systems, Inc. NetScanner™ System (9016, 9021, & 9022) User’s Manual
www.PressureSystems.com
A - 1
Appendix A
All Commands — Quick Reference:
Type Command id Command Function
TCP/IP A
Power-Up Clear
B
Reset
C
Configure/Control Multi-Point
Calibration (4 sub-commands)
V
Read Transducer Voltages
Z
Calculate and Set Gains (Span Cal)
a
Read Transducer Raw A/D Counts
b
Acquire High Speed Data
c
Define/Control Autonomous Host
Streams (6 sub-commands)
h
Calculate and Set Offsets (Re-zero
Cal)
m
Read Temperature A/D Counts
n
Read Temperature Voltage
q
Read Module Status
r
Read High Precision Data
t
Read Transducer Temperature
u
Read Internal Coefficients
v
Download Internal Coefficients
w
Set/Do Operating Options/Functions