EasyManua.ls Logo

Prestige APS596Z - Status LED, Light Flashes and Siren;Horn Indications

Prestige APS596Z
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 APS596Z Owners REV.B
Status LED Flash Indications
LED Flashes Function
OFF Disarmed
Slow Flash Armed
Fast Flash Passive Arming Countdown
ON (Solid) Valet Mode
1 Flash / Disarmed Zone 1 Trigger, Shock Sensor
2 Flashes / Disarmed Zone 2 Trigger, Trunk / Hood
3 Flashes / Disarmed Zone 3 Trigger, Door
Siren/Horn Chirp Indications
Chirps Function
1 Arm
2 Disarm
3 Door Ajar Upon Arming
4 Disarm / Triggered
Parking Light Flash Indications
Flashes Function
1 Arm
2 Disarm
3 Disarm / Triggered
ON (Solid or Slow Flash) Remote Started
Status LED, Light Flashes, and Horn Indications
Manually Overriding the Security System
Your system can be disarmed without the use of the transmitter. This is
necessary to operate your vehicle if the transmitter is lost or its battery fails.
To by-pass the alarm system;
1. Open the vehicle door. The alarm will sound.
2. Turn the ignition key to the ON position.
3. Within ten (10) seconds, press and release the valet button.
The alarm system will stop sounding and enter the (by-passed) mode. You
can now start and operate the vehicle normally.

Other manuals for Prestige APS596Z

Related product manuals