EasyManua.ls Logo

Prestige APS901Z User Manual

Prestige APS901Z
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1APS901Z Owners rev A.
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the conguration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
Owners Guide
For Model:
APS901Z
Remote Start System
Question and Answer IconNeed help?

Do you have a question about the Prestige APS901Z and is the answer not in the manual?

Prestige APS901Z Specifications

General IconGeneral
BrandPrestige
ModelAPS901Z
CategoryRemote Starter
LanguageEnglish

Summary

Using Your Remote Control

Remote Starting Your Vehicle

Activate the remote start by pressing the button twice. The vehicle starts and runs for a set time.

Door Unlock

Unlock the vehicle while the engine is running by pressing and holding the button for 3 seconds.

Remote Start Shutdown

Turn off the remote start by pressing the button twice or pressing the vehicle's brake.

Entering the Vehicle while Running

Steps to enter the vehicle safely when it is running via remote start.

Preheating or Precooling Interior

Set temperature controls before exiting to preheat or precool the interior.

Security Upgrade Features

System Arm

Arm and lock the vehicle doors by pressing the button once. The LED flashes once.

System Disarm

Disarm and unlock the vehicle doors by pressing the button twice.

Remote Starting Vehicle (Security)

Activate remote start by holding the button for 3 seconds. Vehicle runs for set time.

Remote Start Shutdown (Security)

Turn off remote start by holding the button for 3 seconds or pressing the brake.

System Override

Disarm the system without the remote using the valet button on the antenna.

Valet Mode Operation

Enter/exit Valet Mode by turning ignition ON and holding valet button for 5 seconds.

Remote Control Configuration

Remote Control Programming Steps

Detailed steps for programming remote transmitters to the system, including memory limits.

Replacing Remote Control Batteries

Instructions on how to open the remote and replace the CR2032 battery.

Related product manuals