N
Nicole Goodwin MDJul 28, 2025
What to do if my Prestige APS57TM shows 'Hood Open'?
- AAngela SmithJul 28, 2025
If your Prestige Remote Starter system indicates 'Hood Open', ensure that the hood is completely and securely closed.
To Next PageTo Next PageWhat to do if my Prestige APS57TM shows 'Hood Open'?
If your Prestige Remote Starter system indicates 'Hood Open', ensure that the hood is completely and securely closed.
How to fix 'Tach Programming' issues on my Prestige Remote Starter?
If you are experiencing issues related to 'Tach Programming' with your Prestige Remote Starter, reprogram the tachometer settings.
What to do if my Prestige APS57TM Remote Starter displays 'High Tach'?
If your Prestige Remote Starter indicates 'High Tach', adjust the tachometer settings.
General| Type | Remote Starter |
|---|---|
| Channels | 5 |
| Keyless Entry | Yes |
| Number of Buttons on Remotes | 5 |
| Remote Start | Yes |
| Alarm | Yes |
| Number of Remotes | 2 |
| Range | Up to 1, 500 feet |
| Compatibility | Most vehicles |
| Security Features | starter disable |
Locks or unlocks vehicle doors by pressing the designated button.
Starts or shuts down the vehicle remotely using button presses.
Sets interior temperature for heating or cooling via remote start.
Trunk release and personal protection alarm (panic) features.
Steps to enter vehicle while remote start is active without shutting it down.
Arms the system to lock doors and disarms to unlock doors.
Disarm system via valet button and enter/exit valet mode.
Interprets LED flash patterns for system status (Armed, Disarmed, Valet Mode).
Defines horn chirp signals for system events like Arm, Disarm, Door Ajar.
Explains parking light flashes for Arm, Disarm, Door Ajar, and Remote Started.
Interprets parking light flashes to diagnose remote start shutdown reasons.
Procedure for programming transmitters to the system using the valet button.
Guide to replacing the CR2032 battery in the 1-button remote control.
Explains warranty coverage for the product and transmitter, exclusions, and limitations.
States compliance with FCC rules and Industry Canada, including conditions for operation.
Warns that unauthorized modifications can void user's authority to operate equipment.
