F030— 02/17—USL.2 For more wonderful cages, toys, and accessories for dogs, cats, birds, chickens, rabbits, ferrets and small animals, visit www.prevuepet.com
3
To assemble the UPPER CAGE,
you will need these pieces:
To finish, you will need
these pieces:
Slide the side panels
onto the frame posts.
Attach the back
panel with long
hex screws at the
top and bottom
corners of the
panel.
Align the extended
wires on the back
panel with the
holes on the side
panel frame rails.
× 4 ( long screws )
× 4 ( long screws )
Before adding the top front panel,
it’s a good time to add the perches.
Align the extended wires on the front panel
with the holes on the side panel frames, and
attach with long hex screws in the top and
bottom corners.
At this point, check and tighten ALL
screws over the entire cage to ensure
a safe and stable home.
⁕
continued...
To Next Page
Loading...
