EasyManua.ls Logo

Pride Mobility Go-Go Elite traveller - Speed Adjustment and Battery Monitoring; Rear Section Components

Pride Mobility Go-Go Elite traveller
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Elite Traveller www.pridemobility.com 19
III. YOUR TRAVEL SCOOTER
Speed Adjustment Dial
This dial allows you to preselect and limit your Travel Scooters top speed.
! The image of the tortoise represents the slowest speed setting.
! The image of the hare represents the fastest speed setting.
Battery Condition Meter
When the key is fully inserted into the key switch, this meter indicates approximate battery strength. For further informa-
tion on the battery condition meter, see IV. “Batteries and Charging.”
REAR SECTION
The manual freewheel lever, anti-tip wheels and motor/
transaxle assembly are located on the rear section of
your Travel Scooter. See figure 6.
WARNING! Before placing your Travel
Scooter into or taking it out of
freewheel mode, remove the key from
the key switch. Never sit on a Travel
Scooter when it is in freewheel mode.
Never put a Travel Scooter in
freewheel mode on any incline.
Manual Freewheel Lever
Whenever you need or want to push your Travel Scooter for short distances, you can put it in freewheel mode.
1. Remove the key from the key switch.
2. Push forward on the manual freewheel lever to disable the drive system and the brake system. You may now
push your Travel Scooter.
3. Push the manual freewheel lever rearward to reengage the drive and the brake systems; this takes your Travel
Scooter out of freewheel mode.
WARNING! When your Travel Scooter is in freewheel mode, the braking system is
disengaged.
! Disengage the drive motors only on a level surface.
! Ensure the key is removed from the key switch.
! Stand beside the Travel Scooter to engage or disengage freewheel mode. Never sit on
a Travel Scooter to do this.
! After you have finished pushing your Travel Scooter, always return it to the drive mode
to lock the brakes.
Anti-Tip Wheels
The anti-tip wheels are an integral and important safety feature of your Travel Scooter. They are bolted to the frame
and located at the rear of the Travel Sooter.
WARNING! Do not remove the anti-tip wheels or modify your Travel Scooter in any way
that is not authorised by Pride.
Motor/Transaxle Assembly
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your Travel Scooters
batteries into the controlled mechanical energy that drives the Travel Scooters wheels.
MANUAL
FREEWHEEL
LEVER
ANTI-TIP WHEELS
Figure 6. Rear Section
MOTOR/
TRANSAXLE
ASSEMBLY

Table of Contents

Related product manuals