Pride Mobility Go-Go Elite traveller User Manual

6 www.pridemobility.com Elite Traveller
II. SAFETY
Removal of grounding prong can create electrical hazard. If necessary, properly
install an approved 3-pronged adapter to an electrical outlet having 2-pronged
plug access.
Do not use a cell phone, walkie/talkie, laptop or other radio transmitter while
operating.
Do not connect an extension lead to the AC/DC converter or the battery charger.
Do not remove anti-tip wheels.
Avoid exposure to rain, snow, ice, salt or standing water whenever possible. Maintain
and store in a clean and dry condition.
Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive
conditions.
Contact with tools can cause electrical shock.
Do not allow unsupervised children to play near the Travel Scooter while the
batteries are charging.
Keep your hands away from the tyres when driving. Be aware that loose fitting
clothing can become caught in the drive tyres.

Pride Mobility Go-Go Elite traveller Specifications

General

Weight Capacity	300 lbs
Maximum Speed	4 mph
Ground Clearance	2.5 inches
Turning Radius	33 inches
Overall Width	19.5 inches
Tires	Front: 2 inches x 8 inches, Rear: 2.5 inches x 8 inches
Charger	Off-board, 2 amp
Seat Width	17 inches
Seat Depth	16 inches
Battery Type	Sealed Lead Acid
Weight (with batteries)	96 lbs
Seat Height	20 inches