To Next PageTo Next PageWhat to do if all systems on my Pride Mobility Zero Turn 10 Scooter seem dead?
If all systems on your Pride Mobility Scooter appear dead: * Ensure the key is in the 'on' position. * Verify the batteries are fully charged. * Push in the main circuit breaker reset button. * Confirm the battery and front-to-rear harnesses are properly connected. * Check if the power down timer feature has been activated.
What to do if battery condition meter dips way down and the motor surges on my Pride Mobility Scooter?
If the battery condition meter dips way down and the motor surges or hesitates when you engage the throttle control lever on your Pride Mobility Scooter, fully charge the scooter’s batteries.
What to do if Pride Mobility Scooter’s battery voltage is too high?
If your Pride Mobility Scooter's battery voltage is too high, or the charger is still connected, unplug the charger and turn the key off, then back on again.
What to do if throttle control lever not at center position at start up on Pride Mobility Scooter?
If the throttle control lever is not at the center position at start-up for your Pride Mobility Scooter: * Verify that the batteries are fully charged. * Return the throttle control lever to the center position, turn the scooter off, then back on.
What to do if manual freewheel lever is in freewheel position on Pride Mobility Scooter?
If the manual freewheel lever is in the freewheel position on your Pride Mobility Scooter, remove the key from the key switch, push the manual freewheel lever to the drive position, and restart your scooter.
General| Brand | Pride Mobility |
|---|---|
| Model | Zero Turn 10 |
| Category | Scooter |
| Language | English |
Explains symbols indicating warnings, mandatory actions, and prohibitions.
Discusses general safety rules and considerations for scooter operation.
Lists essential checks before operating the scooter for safety.
Details the regenerative and disc park brake systems.
Introduces the scooter, its components, and tiller console controls.
Instructions for using lights, signals, and horn.
Explains speed adjustment, throttle control, and power seat functions.
Covers safe driving practices and procedures for getting onto/off the scooter.
Provides instructions and warnings for battery charging procedures.
Guidance on cleaning, tire checks, and general upkeep.
Instructions for replacing fuses and storing the scooter.
Steps for safely taking the scooter apart and reassembling it.
Details on adjusting seat, tiller, and armrests for comfort.
Explains diagnostic codes and solutions for common issues.
Information on storing the scooter for extended periods and proper disposal.
