Primex BC100 - LED Indicators

LED Indicators
A Smart-Bridge has three LED indicators, located on the front of the device, that provide a visual indicator of its current status.
LED indicator specifications
Note:
When power is applied to the device, the LCD segments display and LED indicators briefly illuminate.
LED Status Device Power
Green LED
Illuminated
Normal AC or PoE power: LED is illuminated
Battery-power only: LED is disabled to conserve battery life. Upon power up, illuminates for 2
seconds
Yellow LED
Flashing
Low Battery
Unresponsive (1
connection to NTP
Server)
AC or PoE power: LED is illuminated and flashes.
Refer to the LCD display to identify the status resulting in the condition.
Either indicates a low battery status or an Unresponsive status.
Unresponsive status - indicates during its last connection to the Ethernet or Wi-Fi network, it
failed to connect to a NTP Server to obtain UTC time.
Red LED
Flashing
Unresponsive Indicates its connection to the Ethernet or Wi-Fi network has failed for three (3) consecutive
times; it has not checked-in to OneVue or obtained UTC time from a NTP Server.
10