What's Needed - Smart-Sync Bridge Installation
Inspect the package contents to verify the included components are present and no damage has occurred during shipping.
What's included
(1) Smart-Sync Bridge
(1) Smart-Sync Bluetooth Antenna
(1) AC-power adapter
(1) Primex 3.0v Lithium/Iron Disulfide Battery Pack (contains 2 AA 1.5V Energizer® Ultimate Lithium batteries)
Note:
Devices using AC or PoE power can also use battery power as a backup power source in the event of a power loss. During
battery backup, the device operates on battery power and continues to function for up to one (1) day on continuous battery
power.
(2) Sets of 3M™ Dual Lock Fastener & Tape, 2" x 1" strips
(1) USB configuration cable; supplied with a device order only. For use with the Primex Device Configuration software to set a bridge to
No Network mode, manually configure network settings or troubleshoot device network connectivity issues. It's recommended to save
this cable for future use.
Optional accessories
AC-power extension cable
What you need - recommended
Self-adhesive hook-and-loop mounting tape to secure cables
21
Smart-Sync™ Bridge Install Guide
To Next Page
Loading...