How to Measure the Bluetooth Signal Strength at Installation Location
To determine if a Smart-Sync device location has adequate signal strength, you can measure the Bluetooth signal strength at the
installation location.
Primex recommends using the nRF Connect for Mobile - allows you to scan and explore Bluetooth® low energy devices. nRF Connect
for Mobile is available for iOS and Android™ devices and can be downloaded from the App Store or Google Play.
l Smart-Sync Bridge devices advertise as Bridge and Smart-Sync Clocks advertise as PrimexClock. The device's 12-character Device
ID is displayed to uniquely identify each device advertising.
l Smart-Sync Clock - the Bluetooth Radio Frequency (RF) signal is required to be -1 to -85 dBm at the installation location.
l Smart-Sync Bridge - the Bluetooth Radio Frequency (RF) signal is required to be -1 to -75 dBm at the installation location.
28
Smart-Sync™ Bridge Install Guide
To Next Page
Loading...