What to do if my Primus MB26 Scrubber displays 'Unload' and 'Door is Open'?
If your Primus Scrubber displays 'Unload' and indicates that the 'Door is Open', check if the “Door Switch” is still closed. If the “Door Switch” is broken, replace it.
How can I fix a 'Heating Time Failure' on my Primus MB26 Scrubber?
If you're getting a 'Heating Time Failure' (Failure 14) on your Primus Scrubber, check if the programmed Max Heating time in the Initialisation menu is acceptable. If the machine has a small heating capacity, increase the value of the Max heating time.
How to resolve a 'Wrong Inverter Model Type' error on a Primus MB26 Scrubber?
If your Primus Scrubber displays a 'Wrong Inverter Model Type' (Failure 44) error, verify that you have selected the correct machine type in the Configuration menu.
How do I clear the 'Service Due Warning' on my Primus MB26?
If you're seeing a 'Service Due Warning' (Failure 41) on your Primus Scrubber, you can reset the cycle counter in the Service Menu. To check the cycle counter, press the SERVICE-STATE button and find the value in the second menu item.
Essential safety warnings and precautions to prevent injury and damage.
Step-by-step process for creating, editing, and programming wash programs and functions.
Steps to access and navigate the Initialisation Menu for initial setup.
Guide to configuring machine-specific settings via the Configuration Menu.
How to access and use the Program Menu for managing wash programs.
Details on selecting program numbers, naming programs, viewing, editing, and copying.
To Next Page
General