66 PROGRAMMING MANUAL 100962 G PUBLICATION DATE 24 JUN 2008.DOC
minutes in steps of 0.5 minutes.
• The default time is 1,0 Minutes.
• Programming a time of 0 minutes : the Spray will not be
functional (cfr No Wash)
• Enter the desired spray time. Press the ENTER button for
confirmation.
• When a signal is programmed, a pause will be introduced at
the end of the Wash Step. This allows the operator to add
soap for the next step. To alert the operator that the program
has been interrupted, a buzzer signal will be activated.
By pressing the START button, the program will continue.
• Yes : Signal enabled.
No : Signal disabled.
• Press the ENTER button for confirmation.
Goto °
T THE NO WASH SEQUENCE
• The wash function of the programmed step is skipped.
Goto °
Prewash
Wash
Cooldown
Rinse
Final Rinse
Soak
Flush
S
ra
No wash
P:Pr XX Step XX
Signal : No
To Next Page
Loading...
