4. Inspection of the cutoff saw before use:
. Make sure there are no loose objects on or near the saw.
. Except for the carburetor adjustment screws, all other bolts, nuts, screws and the
fuel tank cap should be securely tightened. Make sure all rubber hoses for oil flow
are tightly connected with no leaks.
. Make sure the blade rotates smoothly; the starter rope can be pulled through and
guided back without being tangled.
. Check to make sure the Throttle Trigger, the Full Throttle Lock Button, the Choke
Lever, the Decompression Valve and the kill Switch all function well without failure.
. Check to make sure the blade guard has no
visual damage. Adjust the guard as necessary
so the spark beam generated during cutting
can be directed away from the operator. (Ref.
Fig.2)
Fig 2
16
To Next Page
Loading...