2. Starting (Ref. Fig.7)
. Place the cut-off saw on the ground and make sure it’s
in good balance, see to it that the saw blade does not
touch any objects or the ground, and there is no person
within the swivel range of the saw.
. Press the button of the decompression valve (1).
. Set the choke lever (2) to an appropriate position:
to
if the engine is cold;
to
if the engine is warm(even if the engine has already run but is still cold);
Fig. 6
to
if the engine is warm (latched position for warm start).
. Pull the throttle trigger (3) backward as far as the stop and hold it in position.
. Press down the full throttle lock button (4).
. Release the throttle trigger (3).
27
To Next Page
Loading...