. Whenever you hear an abnormal sound coming out of the cut-off saw, stop cutting
immediately for inspection (Note the muffler and the blade are very hot at this time.
so take care not to get burned). Only resume work after the trouble is eliminated
. Do not make adjustments or any other maintenance or troubleshooting with the
cut-off saw while it is running.
. Take precaution when re-entering a cut and do not turn the blade at an angle or
push it into the cut as this may result in a pinching of the blade.
7. Precautions on fueling:
. Fuel the machine only in a well-ventilated environment.
. Before refueling, let the engine cool off naturally. Do not take
any other forceful measures to cool the engine down.
. Remove the fuel tank cap carefully so as to allow any pressure
build-up in the tank to release slowly. (Ref. Fig.4)
. Tighten fuel cap securely after fueling and clean off spillage if
any.
Fig. 4
19
To Next Page
Loading...