How to resolve a 'BUFFER OVERRUN' error on a Printronix ProLine 5 Printer?
The 'BUFFER OVERRUN' error on your Printronix printer indicates a receive overrun on the serial interface. Check the printer's serial port configuration setup. Ensure the baud rate and data protocol match both the host and printer settings.
What does 'FRAMING ERROR' mean on Printronix Printer?
If your Printronix printer displays 'FRAMING ERROR', it means there is a serial framing error on the serial interface. Check your serial host interface parameter settings and adjust them to match the settings of the attached host if necessary.
What to do if Printronix ProLine 5 Printer displays 'CLOSE PLATEN'?
If your Printronix printer shows 'CLOSE PLATEN', it means the forms thickness lever is open. Close the forms thickness lever.
What does 'ONLINE CU TIMED OUT' mean on a Printronix ProLine 5 Printer?
The 'ONLINE CU TIMED OUT' message on your Printronix printer means that with enable poll timeout, the printer was not enabled for one minute on a Coax interface. Check the cable connection and the host system.
General| Connectivity | USB, Parallel, Serial, Ethernet |
|---|---|
| Paper Handling | Continuous forms |
| Weight | Varies by model |
| Operating Systems | Windows, Linux |
| Noise Level | 55 dBA |
To Next Page
