ETHERNET PARAMS Submenus
261
Job Control
• Standard (factory default). The NIC waits for the entire job to be
received
before it indicates the job is done.
• Enhanced. The NIC waits for the entire job to be
printed
before it
indicates the job is done.
• Off. There is no synchronization between the NIC and the printer.
NOTE: For detailed information about using the NIC, refer to the
Network
Interface Card User’s Manual
.
Offline Process
• Disable (the default). When set to disable, the printer does not process
parallel/network data while offline.
• Enable. When set to enable, the printer continues to process (but not
print) the current network/parallel job while the printer is offline until the
printer's buffer is full.
To Next Page
Loading...
