Pro-face GP-4401T Replacement Guidebook

Chapter 3 Replacement Procedure
3.1 Work Flow
Receive screen data from
GP/ST-3400 series *1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP-4401T.
Connect GP-4401T and
PLC with the PLC’s cable.
Start connection and check
the communication.
Remove GP/ST-3400
series.
Connect the power cord.
Check the performance
and start operation.
Installation Screen
Check the compatibility of
hardware in Chapter 2.
Check the connection
between GP-4401T and a
PLC in the GP-Pro EX
Device/PLC Connection
Manual.
Install GP-4401T.
Communication
*1: This step is required if screen data is saved only in the GP unit, not in any other device.
14/40

Pro-face GP-4401T Specifications

General

Brand	Pro-face
Model	GP-4401T
Category	Touch Panel
Language	English