15
17
17. Attach the Seat (28) to the Seat Frame (61)
with four M6 x 18mm Screws (97) (only two are
shown); start all the Screws, and then tighten
them.
28
61
97
19. Make sure that all parts of the hybrid trainer are properly tightened. Extra parts may be included. To
protect the floor or carpet from damage, place a mat under the hybrid trainer.
18
104
18. Plug the Power Adapter (104) into the receptacle
on the rear of the hybrid trainer.
Note: To plug the Power Adapter (104) into an
outlet, see HOW TO PLUG IN THE POWER
ADAPTER on page 16.
To Next Page
Loading...
