13
12. Make sure that all parts are properly tightened before you use the treadmill. To protect the floor or car-
pet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see
page 23). Note: Extra parts may be included.
11. Attach the Tablet Holder (104) with four #8 x 3/8"
Screws (98); start all four Screws, and then
tighten them. Do not overtighten the Screws.
11
98
104
98
To Next Page
Loading...
