To Next PageTo Next PageWhy Pro-Form Performance 1500 power turns off during use?
The Pro-Form Treadmill might be turning off during use due to a tripped power switch. Check the power switch, and if it has tripped, wait for five minutes before pressing it back in. Also, ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Finally, try removing and reinserting the key from the console.
How to fix Pro-Form Performance 1500 that does not turn on?
First, ensure that the power cord is properly plugged into an earthed outlet. Next, verify that the key is correctly inserted into the console. Finally, check the power switch located on the treadmill frame; if it's tripped (protrudes), wait five minutes, then press it back in to reset.
What to do if Pro-Form Performance 1500 Treadmill walking belt slips when walked on?
If the walking belt on your Pro-Form Treadmill is slipping, use the hex key to turn both idler roller screws clockwise, 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches (5 to 7 cm) off the walking platform.
How to fix Pro-Form Performance 1500 incline that does not change correctly?
To recalibrate the incline on your Pro-Form Treadmill, hold down the Stop button and the Speed increase button, insert the key into the console, and then release the Stop button and the Speed increase button. Next, press the Stop button and then press the Incline increase or decrease button. The treadmill will automatically rise to the maximum incline level and then return to the minimum level.
What to do if Pro-Form Performance 1500 walking belt slows when walked on?
If the walking belt on your Pro-Form Treadmill slows down when you walk on it, it might be overtightened. Use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. Also, check the Reed Switch and the Magnet on the left side of the Pulley. Turn the Pulley until the Magnet is aligned with the Reed Switch, ensuring the gap between them is about 1/8 inch (3 mm).
How to center Pro-Form Treadmill walking belt?
To adjust the walking belt on your Pro-Form Treadmill, if it has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
Why Pro-Form Performance 1500 console displays remain lit?
The console displays on your Pro-Form Treadmill might remain lit because the demo mode is activated. To turn off the demo mode, hold down the Stop button for a few seconds.
General| Motor | 3.75 CHP |
|---|---|
| Running Area | 22" x 60" |
| Weight Capacity | 300 Lbs. |
| Programs | 50 Preset Workout Apps |
| Dimensions | 81.25" L x 39.25" W x 69.75" H |
| Speed | 0 – 12 MPH |
| Heart Rate Monitoring | EKG grip pulse |
Contact information for customer service in the UK.
Contact information for customer service in Australia.
Safety warning to keep hands and feet clear during operation.
General safety instructions and precautions for treadmill use.
Steps for safely connecting the treadmill's power cord.
Step-by-step instructions for folding the treadmill for storage.
Safe procedures for moving the folded treadmill.
Instructions for unfolding the treadmill.
Instructions for regular cleaning and upkeep of the treadmill.
Solutions for common treadmill problems and error symptoms.
Guidance on achieving proper heart rate for fat burning and aerobic exercise.
Recommendations for warming up, training zone, and cooling down.
Advice on how often to exercise for optimal results.
Detailed instructions for common stretches for different muscle groups.
