Pro-Form PFBE11520.0 - Page 14

14
ATTACHING WEIGHTS TO THE LEG LEVER
If you plan to use Olympic weights (not included),
see assembly step 13 and attach the three
Olympic Adapters (25) to the weight bench.
To use the Leg Lever (4), slide the desired weights
(A) (not included) onto the weight tube (B). Secure
the weights with the Standard Spring Clip (45) or the
Olympic Spring Clip (46).
STORING WEIGHTS
If you plan to use Olympic weights (not included),
see assembly step 13 and attach the three
Olympic Adapters (25) to the weight bench.
Store weights (not included) by sliding them onto the
weight storage tubes (C) on the Stabilizers (13) (only
one side is shown).
4
13
C
25
25
45, 46
B
A
WARNING: Do not place
more than 130 lbs. (59 kg) on the Leg
Lever (4).