Pro-Form PFTL27721C.0 User Manual

9
3. Attach the Left and Right Handrails (71, 72) to
the Uprights (76) with four M10 x 45mm Screws
(2); start all four Screws, and then tighten
them.
4. With the help of a second person, hold the con-
sole assembly (A) near the Uprights (76).
Insert the Upright Wire (78) through the looped
tie (B) on the back of the console assembly (A).
Connect the Upright Wire (78) to the con-
sole wire (C). The connectors should slide
together easily and snap into place with an
audible click. If they do not, turn one connec-
tor and try again.
3
4
78
A
B
76
2
76
71
72
2
C
5
72
71
3
3
A
5. Attach the console assembly (A) to the Left and
Right Handrails (71, 72) with four M4.2 x 19mm
Screws (3); start all four Screws, and then
tighten them. Be careful not to pinch the
wires.
Next, insert the connectors on the wires (C, 78)
into the console assembly (A). Then, pull the tie
(B) tight around the Upright Wire (78), and cut off
the end of the tie.
B
78
C

Pro-Form PFTL27721C.0 Specifications

General

Brand	Pro-Form
Model	PFTL27721C.0
Category	Treadmill
Language	English