Pro-Form PFTL60918.0 User Manual (English)

Questions and Answers:

S
Sarah McdonaldAug 10, 2025
How to fix Pro-Form Treadmill if the power does not turn on?
- C
  Charles OwensAug 10, 2025
  First, ensure the power cord is correctly plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet. If you're using an AFCI-equipped outlet and the circuit breaker trips repeatedly, consider purchasing an arc filter. Also, ensure the key is fully inserted into the console. Check the power switch near the power cord; if it's tripped (protruding), wait five minutes, then press it back in to reset it. Finally, the console may require activation; refer to assembly step 20 if you haven't activated it yet.
N
Nicole JonesAug 15, 2025
What to do if Pro-Form Treadmill power turns off during use?
- D
  David FitzgeraldAug 15, 2025
  Check the power switch on the treadmill. If it has tripped, wait five minutes, and then press it back in. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console. If the treadmill still won’t run, please see the front cover of this manual.
J
Jasmine GarzaAug 21, 2025
Why is the walking belt off-center or slips on my Pro-Form Treadmill?
- A
  Alexis ElliottAug 22, 2025
  If the walking belt is off-center, first remove the key and unplug the power cord. If the belt has shifted to the left, turn the left idler roller screw clockwise 1/2 turn using the hex key. If it has shifted to the right, turn the left idler roller screw counterclockwise 1/2 turn. Be careful not to overtighten the belt. If the walking belt slips when walked on, first remove the key and unplug the power cord. Using the hex key, turn both idler roller screws clockwise 1/4 of a turn. When correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform.
J
Julia MurphyAug 28, 2025
What to do if the Pro-Form Treadmill walking belt slows when walked on?
- R
  Rhonda WattsAug 28, 2025
  If the walking belt is overtightened, it can decrease performance and damage the belt. Remove the key and unplug the power cord. Using the hex key, turn both idler roller screws counterclockwise 1/4 of a turn. When properly tightened, you should be able to lift each edge of the walking belt 2 to 3 inches off the walking platform.
C
Crystal EllisSep 2, 2025
How to fix Pro-Form Treadmill tablet holder that does not stay in place?
- J
  Jordan BaldwinSep 3, 2025
  Rotate the tablet holder until it faces backward. Then, slightly tighten the indicated screw until the tablet holder stays in place when rotated to the desired position.

Pro-Form PFTL60918.0 Specifications

General

Model number	PFTL60918.0
Incline	0-10%
Speed	0-10 MPH
User capacity	300 lbs
Foldable	Yes
Running area	20" x 55"
Heart rate monitoring	EKG Grip Pulse
Motor	2.5 CHP Mach Z™ Motor
Display	5” High Contrast Display